Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch

#ad
Anndason #ad - 2. The switch may actuate a pump, an alarm, an indicator, or other device. Please note: because the current that the switch can carry is much little05a, you must use a relay or contactor when it is connected by a load, relay and contactor are not included here. Package content : 6 x water level sensor Color : black;net weight : 24g;Package Content : 6 x Water Level Sensor.

3. It can be easily converted from normally open to normally close by invertin the float. Thread diaapprox : 1. 54cm / 06";hex head sizeapprox : 2. 5cm / 1";body total Length : 8. 8cm / 3. 5";cable length : 40cm / 15. 8". Max contact rating : 10w;max Switching Voltage : 100V DC. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1.

Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch #ad - 0a;max contact resistance : 100m Ohm. Material: plastic Color :Black Features: 1.

#ad



DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

#ad
DIGITEN #ad - In the product reviews, he should buy n/o normally open solenoid valve, some buyer also mentioned if someone requires the solenoid valve works for a long time, so that it will open all the time without power and will not be hot. The rated voltage is DC 12V. Food quality and suitable for Reverse Osmosis water system, etc.

If you want it works long hours, you should find a N/O normally open solenoid valve. The highest working temperature of this product reaches 60℃. It's normal and safe phenomenon. But this operation is unreasonable. Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop.

DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed #ad - Working pressure:002-08mpa. It's normal and safe phenomenon. Turn on water when system start;and cut off water when system stop. We continually tests and tracks the product's working status, the highest working temperature of this product reaches 60℃, and the plastic part withstand extremely high temperatures to 150℃.

Pay attentionfew buyers use our N/C normally closed solenoid valve to make it work long hours t would become very hot because there are so many coils inside.

#ad



Liquid Water Level Detection Sensor Module, Maluokasa 12VDC/AC Relay Controller Switch Automation Detection Pump Tank Water Level

#ad
Maluokasa #ad - Strip the thread around 1 cm to make it bare. Its working temperature:32-158℉ 0-70℃. Rated power:4. 8w. It will become hot because there are so many coils inside. The highest working temperature of this product reaches 60℃. It's normal and safe phenomenon. If you want it works long hours, you should find a N/O normally open solenoid valve.

The water level is controlled by controlling the high current relay according to the water level of the detection pool water tower. Relay automation controller:port 1 and 2:when water is full, it will power on;when water is full, it will power on;when water is not enough, it will power off; Port 2 and 3:when water is not enough, it will power off.

The relay controller has the characteristics of small size, simple wiring, low power consumption, large switching capacity, strong anti-interference and high functional stability. The liquid water level detecting sensor can stably realize the automatic pump water pumping when the pool water tower is short of water, and automatically stop the water pump when it is full.

Liquid Water Level Detection Sensor Module, Maluokasa 12VDC/AC Relay Controller Switch Automation Detection Pump Tank Water Level #ad - This product does not require the purchase of a separate probe, and can replace the probe with a household wire. Relay automation controller:port 1 and 2:when water is full, it will power on;when water is full, it will power off ac loading: 250vac; dc loading: 30vdc customers can use the household wire as the probe, it will power on;when water is not enough, no need to purchase probe Detailed connection info has been provided which is easier and more stable to control your pump water level Please contact customer service if you are not sure of the connection, it will power off; Port 2 and 3:when water is not enough, we provide 24-hour customer service to solve your any doubt Dc 12v 1/4" quick connect Solenoid valve.

Turn on water when system start;and cut off water when system stop. Working pressure:0

#ad



Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP3500

#ad
Anndason #ad - Dp3500; max contact Rating : 10W. Feature: this float switch is a device used to sense the level of liquid within a tank, an alarm, an indicator, the switch may activate a pump, or other device. Its working temperature:32-158℉ 0-70℃. Rated power:4. 8w. It will become hot because there are so many coils inside.

Model no. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. If you want it works long hours, you should find a N/O normally open solenoid valve. The water level is controlled by controlling the high current relay according to the water level of the detection pool water tower.

Relay automation controller:port 1 and 2:when water is full, it will power on;when water is not enough, it will power on;when water is full, it will power off; Port 2 and 3:when water is not enough, it will power off. The relay controller has the characteristics of small size, low power consumption, simple wiring, large switching capacity, strong anti-interference and high functional stability.

Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP3500 #ad - The liquid water level detecting sensor can stably realize the automatic pump water pumping when the pool water tower is short of water, and automatically stop the water pump when it is full. This product does not require the purchase of a separate probe, and can replace the probe with a household wire.

#ad



Liyafy 5 Pcs Right Angle White Plastic PP Float Switch Fish Tank Liquid Water Level Control Sensor XSL-PH2

#ad
Liyafy #ad - 2. Cable length : 38cm / 1. 8" x07" thread diaapprox : 13mm / 15";switch Body Size : 45 x 17mm / 05". Product name: water level Sensor Material: PP Main Color: Yellow, White. It's normal and safe phenomenon. The highest working temperature of this product reaches 60℃. Light weight and simple working principle, high reliability.

Strip the thread around 1 cm to make it bare. Package content : 6 x water Level Sensor ; Color :White and yellow. It can be easily converted from normally open to normally close by invertin the float. Dp3500; max contact Rating : 10W. This float switch is a device used to sense the level of liquid within a tank, an indicator, an alarm, the switch may activate a pump, or other device.

Liyafy 5 Pcs Right Angle White Plastic PP Float Switch Fish Tank Liquid Water Level Control Sensor XSL-PH2 #ad - 1. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14.

#ad



DIGITEN G1/2" Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-30L/min

#ad
DIGITEN #ad - Model no. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14. 6". Its working temperature:32-158℉ 0-70℃. Rated power:4. 8w. It will become hot because there are so many coils inside. Max breakdown voltage: ac/dc 220v; max loading current: 1A; Max Contact Resistance: 100m Ohm, Rated Temperature: -10~85C.

Cable length:15cm. Float ball sizeapprox: 10 x 24mm/ 039" x 094" d*h thread diaapprox: 11. 5mm / 0748" bottom clip DiaApprox: 205mm / 0453"; hex nut sizeapprox: 19mm / 08". Max power: 10w; max switching voltage: aC/DC 100V; Max Switching Current: 05a. Waterproof, Heat resistance, pressure resistance, cold resistance.

DIGITEN G1/2" Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-30L/min #ad - Outer diameter: about 079inch frequency: F=7. 5 * q l / min error: ± 2% voltage :3. 5-24vdc, current can not exceed 10ma, f=onstant * units of flow l / min * time seconds flow range:1-30l/min maximum current:15 madc 5v Working voltage range:DC 5-24 V Load capacity:≤10 mADC 5V Operating Temp:≤80℃, 450 output pulses/liters, Operating humidity:35%-90%RH Allow compression:Water pressure 1.

#ad



uxcell IEC255 DC 12V Coil 8Pin DPDT Electromagnetic Power Relay w Socket Base

#ad
uxcell a15062300ux0219 #ad - Working voltage range:DC 5-18 V. This general relay designed with a terminal socket, plays the role as a protector or a circuit switch. Model no. The highest working temperature of this product reaches 60℃. It's normal and safe phenomenon. Cable length : 38cm / 1. 8" x07" thread diaapprox : 13mm / 15";switch Body Size : 45 x 17mm / 0

uxcell IEC255 DC 12V Coil 8Pin DPDT Electromagnetic Power Relay w Socket Base #ad - 5". Product name: water level Sensor Material: PP Main Color: Yellow, White. Action type: dpdt; coil voltage: dc 12v; contact Capacity: 5A 150VAC 5A 28VDC. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14. 6". Overall sizeapprox. 75 x 22 x 64mm/3" x 087" x 2. 52"l*w*h; product name: Power Relay w Socket.

Allow compression:Water pressure 1. 75 mpa below. Max breakdown voltage: ac/dc 220v; max loading current: 1A; Max Contact Resistance: 100m Ohm, Rated Temperature: -10~85C.

#ad



12V Plastic Water Solenoid Valve

#ad
Adafruit Industries 997 #ad - Package content: 1 x power relay w Socket; Model: IEC255; Main Color: Black. Dp3500; max contact Rating : 10W. Normally, the valve is closed. Perfect for your Arduino powered gardening project. Model no. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14. 6". For a power supply, our 9v 1A or 12V 1A power adapters will do the job.

These solenoids are not rated for food safety or use with anything but water. Voltage current6v 160 ma7v 190 ma8v 220 ma9v 240 ma10v 270 ma11v 300 ma12v 320 mA Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:002-08mpa. Action type: dpdt; coil voltage: dc 12v; contact Capacity: 5A 150VAC 5A 28VDC.

12V Plastic Water Solenoid Valve #ad - . Easily control the flow of water. It's normal and safe phenomenon. Also, liquid can only flow one direction. We tried this solenoid at various DC voltages and found we could actuate it down at 6VDC although it was a little slower to open.

#ad



Malida 1/4" inch White Fittings Bulkhead Connector Tube Quick Connect for RO Unit Pack of 5

#ad
Malida quick-0003 #ad - Working voltage range:DC 5-18 V. Pin quantity: 8; mounting Rail Type: 35mm DIN Rail. Flow range:1-30L/min, Sensor:Hall effect. Package content: 1 x power relay w Socket; Model: IEC255; Main Color: Black. It's normal and safe phenomenon. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14.

Malida 1/4" inch White Fittings Bulkhead Connector Tube Quick Connect for RO Unit Pack of 5 #ad - 6". Output waveform:Square Wave, output pulse signal. Work for android and PI system. Country of manufacture: china; Material: Plastic, Electric Parts; Net Weight: 59g. Allow compression:Water pressure 1. 75 mpa below. Cable length : 38cm / 1. 8" x07" thread diaapprox : 13mm / 15";switch Body Size : 45 x 17mm / 0

5". Product name: water level Sensor Material: PP Main Color: Yellow, White. Strip the thread around 1 cm to make it bare. Package content : 6 x water Level Sensor ; Color :White and yellow. 1/4 inch Bulkhead Connector.

#ad



DIGITEN 1/4 Quick Connect 0.3-10L/min Water Hall Effect Flow Sensor Meter

#ad
DIGITEN BuildingMaterials #ad - Dp3500; max contact Rating : 10W. Overall size: 55 x 30 x 25mm / 2. 16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14. 6". Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. Application:water heater thermostat, smart card equipment, water purifier, coffee machines, boiler, water dispensers, the boiler and so on.

DIGITEN 1/4 Quick Connect 0.3-10L/min Water Hall Effect Flow Sensor Meter #ad - . Perfect for your Arduino powered gardening project. Package content: 1 x power relay w Socket; Model: IEC255; Main Color: Black. Flow range:03-10l/min. Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:002-08mpa. Easy to install frequency: f=38 * q L / Min error: ¡À2% Flow range:0

3-10l/min suitable for 1/4" tube Maximum Consumption current:1. 5 madc 5v working voltage range:DC3. 5-12v operating temp:0-80¡ãc, operating humidity:35%-90%RH Pressure range: 0-0

#ad



MOUNTAIN_ARK 2 Pack 63 GPH 240L/H Submersible Water Pump DC 12V 3.6W 9.8ft Lift for Fish Tank Pumping, Rockery Water, Bonsai Fountain

#ad
MOUNTAIN_ARK #ad - Requires 3 psi water pressure to operate not a lot of pressure. Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:002-08mpa. 4. Do not pick up the submersible pump with power cord, or the power cord may be pulled off. Overall size: 55 x 30 x 25mm / 2.

16''x 1. 2''x 1''l*w*h cable length: 37cm/ 14. 6". Please use it in clean water and clean the pump regularly to avoid clogging. It's normal and safe phenomenon. Flow range:1-30L/min, Sensor:Hall effect. Model no. Dp3500; max contact Rating : 10W. Allow compression:Water pressure 1. 75 mpa below. Package includes: 2 * DC Water Pump Note: 1.

MOUNTAIN_ARK 2 Pack 63 GPH 240L/H Submersible Water Pump DC 12V 3.6W 9.8ft Lift for Fish Tank Pumping, Rockery Water, Bonsai Fountain #ad - Cut off the power, disassemble it and cleaning the pump when it is insufficient or not transferred. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1.

#ad