PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD

#ad
PrimoChill 8541600203 #ad - Designed For Perfect Bends. Size:1/2 in. Please use at your own risk. Od warningspractice using the bending tool on some scrap rigid until you get the hang of how best to use it! PrimoChill is not responsible for any damage caused by or when using this product. With the primochill rigid tubing 45/90/180 Degree Bending Kit - 1/2 in.

Od and 12mm od rigid tubing up to 14mm compatible material: petg, PMMA, Copper Parts Included 1x PrimoChill Rigid Tubing 45 Degree Bending Tool - 1/2 in. Od tubing designed for Perfect Bends Specifications Compatibility Size:1/2 in. Now making custom bends with rigid tubing could not be easier. Od and 12mm od rigid tubing up to 14mm.

PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit - 1/2 in. OD #ad - Od 1x primochill rigid tubing 180 Degree Bending Tool - 1/2 in. Od 1x primochill rigid tubing 90 Degree Bending Tool - 1/2 in. Works for petg / Acrylic / Copper. Od you can make consistent bends every time!  Once your tube is heated PETG or Acrylic you can mold the tube using this bending tool for angles of any size.

These tool has mount holes that allow you to mount to a hard surface for a more permanent work station. Features works w/ 12mm and 1/2in.

#ad



PrimoChill 3/8in OD Rigid Tube Silicone Bending Insert Solid Cord - 3 Foot for 3/8in ID Rigid Tube

#ad
PrimoChill 4328452809 #ad - Rigid acrylic tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Primochill is not responsible for any damage caused by or when using this product.

This allows the rigid tube to be heated and bent with less likelihood of the rigid tube collapsing, creating little cavities along the surface of the bent rigid tube. The primochill 3/8in od rigid tube silicone Bending Insert Solid Cord is used for bending the PrimoChill Rigid Tubing 3/8in. This insert cord is solid and is recommended for more complex bends.

PrimoChill 3/8in OD Rigid Tube Silicone Bending Insert Solid Cord - 3 Foot for 3/8in ID Rigid Tube #ad - The solid cord is a little harder to remove vs a tubed version bending insert since it it is a solid cord and can not be stretched as much as a tube can. Notes: this silicone bending insert only works with 3/8" ID tube. Sold in 3 foot pieces, a quantity of 3 would result in 3x 3 foot pieces. Warning/cautions with the use of different components, materials, and flow rates, fluids, results may vary with the appearance of your tubing.

Please use at your own risk.  . Id.

#ad



PrimoChill Universal Tube Cutter Flex and PETG

#ad
PrimoChill 8541599719 #ad - Easy and safe to store with locking mechanism. Perfect size to grip. It comes with a wide cutting base to support tubing while cutting. Works great with all tubing sizes up to and over 1 inch. Extremely sharp, Cuts PETG Clean. Use at your own risk. The quality surpasses any other cutter on the market with a full metal body that allows a stable feel when gripped.

PrimoChill Universal Tube Cutter Flex and PETG #ad - The stability ensures the frame doesn't twist making these a safe solution for all your cutting needs. The result is an even cut that allows a perfect seal to the base of your fittings. Create perfect cuts on up to 25mm tubing with the PrimoChill Universal Tube Cutter. Specifications hardened steel blades tube range:up to 1 inch OD 25mm Included Parts 1x PrimoChill Universal Tube Cutter Warnings:PrimoChill is not responsible for any hardware damage.

#ad



XSPC PETG and Acrylic Tubing Chamfer Tool

#ad
XSPC 5060175586315 #ad - XSPC PETG and Acrylic Tubing Chamfer Tool #ad - Easy and safe to store with locking mechanism. Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm. Xspc petg chamfer toolmodel: 5060175586315 Perfect size to grip. Extremely sharp, Cuts PETG Clean. For use with rigid PETG and Acrylic Tubing.

#ad



PrimoChill RFB Rigid Tubing Finishing Bit - 3/8in. ID x 1/2in. OD

#ad
PrimoChill 8541599042 #ad - This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. For use with rigid PETG and Acrylic Tubing. Id x 1/2 in. Crank up the rpms and you can customize the length of the tube as well. Custom fitting your rigid tube is now so much easier! Perfect size to grip.

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB Rigid Finishing Bit is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. Material: petG, PMMA. Extremely sharp, Cuts PETG Clean.

PrimoChill RFB Rigid Tubing Finishing Bit - 3/8in. ID x 1/2in. OD #ad - Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm. Size: 3/8in. Due to extremely quick dulling of the bit, Copper tubing is not recommended. Od. Easy and safe to store with locking mechanism.

#ad



CORSAIR Hydro X Series,XC7 RGB CPU Water Block,16 Individually addressable RGB LEDs,Software-Enabled, 115X/AM4

#ad
Corsair CX-9010004-WW #ad - Size: 3/8in. A precision machined nickel-plated copper cold plate and more 60 high-efficiency micro-cooling fins draw the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. Od. Easy and safe to store with locking mechanism. Due to extremely quick dulling of the bit, Copper tubing is not recommended.

The xc7's nickel-plated copper cold plate and more than 60 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking. 16 individually addressable rgb leds deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro.

Transparent flow chamber shows off your coolant and enhances RGB lighting. Add a corsair lighting node pro or commander pro and powerful corsair iCUE software to enable you to customize and instantly Sync RGB lighting across all your Corsair RGB products including water blocks, fans, keyboard, LED light strips and more.

CORSAIR Hydro X Series,XC7 RGB CPU Water Block,16 Individually addressable RGB LEDs,Software-Enabled, 115X/AM4 #ad - Easy and fast installation on intel LGA 115x or AMD AM4 Sockets with included mounting screws and pre-applied thermal material. Material: petG, PMMA. Tech support # 1-888-222-4346 opt #1 Perfect size to grip. Id x 1/2 in. The corsair hydro x series xc7 rgb CPU water block combines premium construction, vivid RGB lighting and extreme cooling performance.

#ad



Cooling Loop Pre-Treatment - PrimoChill SysPrep

#ad
PrimoChill FBA_PC-SPREP #ad - Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm. Extremely sharp, Cuts PETG Clean. Primochill is not responsible for any hardware damage. No leaks!2. Empty bottle of sysprep into 1 uS Gallon of fresh DI or Distilled water, and shake for 30 seconds3. Add mix to cooling loop.

4. Fill loop with treated water and be sure to remove as many air bubbles as possible. 5. Start loop pump and begin circulating the treated water. 6. Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated. While using for longer periods of time doesn't have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.

Cooling Loop Pre-Treatment - PrimoChill SysPrep #ad - 7. Drain System. Inspect drained water for debris or foreign particles. It is safe to use on rubber, o-rings, plastics and acrylics so rest assured all your seals, reservoirs and such are all safe!Instructions 1. Install your cooling loop and double-check connections to ensure loop is "closed". Environmentally Responsible, Safe, and Non Toxic Product.

#ad



EKWB EK-AF G1/4" 6mm Male to Male Extender Fitting, Black, 4-Pack

#ad
EKWB TR-3831109846292-4P #ad - Sealed with quality orings. These extenders can be either tightened by hand or by using Allen Key 9mm not included, available for separate purchase. Model: tr-3831109846292-4p Perfect size to grip. Environmentally Responsible, Safe, and Non Toxic Product. Size: 3/8in. Safe on all plastics, and Miscellaneous Gasket Materials, rubbers, Including Acrylic.

Just add to a Gallon of Water. For use with rigid PETG and Acrylic Tubing. Easy and safe to store with locking mechanism. Pre-mixed. This is not a revolvable extender. Ek-af extender m-m is a simple male-threaded extender interconnect for connecting two water cooling components with female G1/4 threads together.

EKWB EK-AF G1/4" 6mm Male to Male Extender Fitting, Black, 4-Pack #ad - Od. Id x 1/2 in. Material: petG, PMMA. Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm.

#ad



PrimoChill 1/2in. O.D. Rigid PETG Tube 30in. - 12 Pack - Clear

#ad
PrimoChill RTP12-1236 #ad - Size: 3/8in. Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm. The less your build requires the more time and money you save searching for the right fitting. Perfect size to grip. Id x 1/2 in. Primochill is once again helping performance enthusiasts, case modders, and those in search of the Next Best thing in watercooling.

Easy and safe to store with locking mechanism. Just add to a Gallon of Water. Primochill rigid petg tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries.

PrimoChill 1/2in. O.D. Rigid PETG Tube 30in. - 12 Pack - Clear #ad - Material: petG, PMMA. Pre-mixed. For use with rigid PETG and Acrylic Tubing. ±. 005. Extremely sharp, Cuts PETG Clean. Due to extremely quick dulling of the bit, Copper tubing is not recommended. The xc7's nickel-plated copper cold plate and more than 60 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking.

16 individually addressable rgb leds deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro.

#ad



Thermaltake Pacific DIY Silicon Insert for ID 12mm 1/2" PETG Hard Tube CL-W200-OS00GM-A

#ad
Thermaltake USA Direct CL-W200-OS00GM-A #ad - Environmentally Responsible, Safe, and Non Toxic Product. Works great with all tubing sizes up to and over 1 inch. Dimensions: 47. 7mm x 47. 7 x 41mm. Due to extremely quick dulling of the bit, Copper tubing is not recommended. The xc7's nickel-plated copper cold plate and more than 60 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocking.

Thermaltake Pacific DIY Silicon Insert for ID 12mm 1/2" PETG Hard Tube CL-W200-OS00GM-A #ad - 16 individually addressable rgb leds deliver 360° of stunning customizable RGB lighting effects when combined with a Corsair lighting Node PRO or Commander Pro. Transparent flow chamber shows off your coolant and enhances RGB lighting. Add a corsair lighting node pro or commander pro and powerful corsair iCUE software to enable you to customize and instantly Sync RGB lighting across all your Corsair RGB products including water blocks, fans, keyboard, LED light strips and more.

Easy and fast installation on intel LGA 115x or AMD AM4 Sockets with included mounting screws and pre-applied thermal material. Water Based. ±. 005. Id x 1/2 in. Size: 3/8in.

#ad



15ml Bottle - PrimoChill Liquid Utopia

#ad
PrimoChill PCLUBT-CLR #ad - Id x 1/2 in. Outer diameter od: 1/2in. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.

15ml Bottle - PrimoChill Liquid Utopia #ad - Tyler direct is not responsible for any hardware damage. Od. Size: 3/8in. Thicker Wall for Safer Operation. No matter which of the twelve colors you choose, PrimoChill's Liquid Utopia makes life easy for you, and short for Algae and Corrosion. Color: Gun Metal. Just add to a Gallon of Water. Do not mix with the pre mixed pc ice or pc pure******** warnings/cautions: * liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents.

Protects ferrous and non-ferrous metals from corrosion. Non-toxic, and biodegradable. Can be used in new installrecommended or existing loops. Bottle size: 15ml.

#ad