Teensy 3.6 Without Pins

#ad
PJRC #ad - 180 mhz arm cortex-m4 with floating point unit 1m flash, capable of full 100 mbit/sec speed native 4 bit sdio micro sd card port i2s audio port, 4k eeprom microcontroller chip mk66fx1m0vmd18 usb high speed 480 mbit/sec port 2 can bus ports 32 general purpose dma channels 22 pwm outputs 4 i2c ports 11 touch sensing inputs 62 i/o pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 22 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 256K RAM, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 4 I2C Ports Real Time Clock 180 mhz arm cortex-m4 with Floating Point Unit.

Teensy 3.6 Without Pins #ad - . Microcontroller chip MK66FX1M0VMD18. 1m flash, 256k ram, 4k eePROM.

#ad



PJRC Teensy 4.0 Without pins

#ad
PJRC #ad - 2 usb ports, both 480 MBit/sec. 1024k ram 512k is tightly coupled 2048k flash 64k reserved for recovery & eeprom emulation 2 usb ports, all interrrupt capable 14 analog pins, all with 4 byte fifo 7 serial, both 480 mbit/sec 3 can bus 1 with can fd 2 i2s digital audio 1 s/pdif digital Audio 1 SDIO 4 bit native SD 3 SPI, all with 4 byte FIFO 32 general purpose DMA channels 31 PWM pins 40 digital pins, all with 16 word FIFO 3 I2C, 2 ADCs on chip Cryptographic Acceleration Random Number Generator RTC for date/time Programmable FlexIO Pixel Processing Pipeline Peripheral cross triggering Power On/Off management Actual size is 1.

4 by 07 inch, same form-factor as Teensy 3. 2. Teensy 4. 0 features an arm cortex-m7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. 1024k ram 512k is tightly coupled. 3 can bus 1 with CAN FD. 2 i2s digital Audio. 2048k flash 64k reserved for recovery & EEPROM emulation.

#ad



PJRC Teensy 3.2

#ad
PJRC 6485230 #ad - Also, it can provide system voltage of 3. 3v to other devices at up to 100mA. Dimensions: 1. 4 x 07" ~35 x 18 mm 1024k ram 512k is tightly coupled. The teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability.

2 usb ports, both 480 MBit/sec. Additionally, if it is used within the Teensy 3. 1 limits of operation, the Teensy 3. 2 and 3. 1 are interchangeable! note: This does not come with a USB cable, please check below for an appropriate one. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers.

PJRC Teensy 3.2 #ad - 2 i2s digital Audio. Each Teensy 3. 2 comes pre-flashed with a bootloader so you can program it using the on-board usb connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

#ad



3.6 - Audio Adaptor Board for Teensy 3.0

#ad
PJRC . #ad - All 3 clocks are created by the Teensy. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, where all its clock pins are inputs. The audio chip connects to Teensy v3 using 7 signals. 1024k ram 512k is tightly coupled. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, and 3 clocks, LRCLK 44.

1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. 2 i2s digital Audio. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Audio data uses i2s signals, and 3 clocks, BCLK 1. 41 mhz and mclK 11. 29 mhz. The i2c pins sda and scl are used to control the chip and adjust parameters. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers.

3.6 - Audio Adaptor Board for Teensy 3.0 #ad - The sgtl5000 chip operates in "slave mode, " where all its clock pins are inputs. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

#ad



Teensy 3.6 with pins

#ad
PJRC #ad - 2 usb ports, both 480 MBit/sec. Audio data uses i2s signals, and 3 clocks, BCLK 1. 41 mhz and mclK 11. 29 mhz. 2048k flash 64k reserved for recovery & EEPROM emulation. 180 mhz arm cortex-m4 with floating point unit 1m flash, 4k eeprom microcontroller chip mk66fx1m0vmd18 usb high speed 480 mbit/sec port 2 can bus ports 32 general purpose dma channels 22 pwm outputs 4 i2c ports 11 touch sensing inputs 62 i/o pins 42 breadboard friendly 25 analog inputs to 2 adcs with 13 bits resolution 2 analog outputs dacs with 12 bit resolution 22 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 256K RAM, capable of full 100 Mbit/sec speed Native 4 bit SDIO micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 4 I2C Ports Real Time Clock 1024k ram 512k is tightly coupled.

3 uarts serial ports spi, can bus, i2s, i2c, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, wiz820io Ethernet, and other 3.3v add-on boards that require a little more power. This audio adapter lets you easily add high quality 16 bit, 44.

Teensy 3.6 with pins #ad - 1 khz sample rate cD quality audio to your projects with a Teensy 3.

#ad



DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield

#ad
DEPEPE #ad - 1m flash, 256k ram, 4k eePROM. 2048k flash 64k reserved for recovery & EEPROM emulation. The i2c pins sda and scl are used to control the chip and adjust parameters. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, where all its clock pins are inputs.

180 mhz arm cortex-m4 with Floating Point Unit. Come with 15pcs male headers and 15pcs female headers. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Pre-soldered header pins. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield #ad - 2 usb ports, both 480 MBit/sec. 3 uarts serial ports spi, i2s, i2c, can bus, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.3v add-on boards that require a little more power.

This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3.

#ad



Teensy LC USB Development Board Without Pins

#ad
PJRC DEV-13305 #ad - 2 usb ports, both 480 MBit/sec. Great tools for arduino prototype shield. Microcontroller chip MK66FX1M0VMD18. All 3 clocks are created by the Teensy. Note: the teensy lc does not come with a micro-B USB cable. 10 pwm outputs 7 timers for intervals/delays, separate from PWM. Type of row: single row, type of pin: straight.

. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. Pre-soldered header pins. Dimensions: 1. 4 x 07" ~35 x 18 mm 1024k ram 512k is tightly coupled. 32 bit arm cortex-m0+ 48 mhz cpu 62kb flash memory, 8kB RAM, 1/8emukB EEPROM. Obviously, the lc doesn't share a lot of power that the 3.

Teensy LC USB Development Board Without Pins #ad - 1 possesses but by no means does it make the lc a 'weak' board! the Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high res Analog inputs. 2 i2s digital Audio. Audio data uses i2s signals, and 3 clocks, BCLK 1. 41 mhz and mclK 11. 29 mhz.

#ad



Teensy 3.5 Without Pins

#ad
PJRC MK64FX512 #ad - Made of copper and plastic. Come with 15pcs male headers and 15pcs female headers. All 3 clocks are created by the Teensy. Great tools for arduino prototype shield. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, where all its clock pins are inputs.

Teensy 3.5 Without Pins #ad - 180 mhz arm cortex-m4 with Floating Point Unit. 13 high resolution analog inputs 27 Digital I/O Pins NOT 5V Tolerant. Microcontroller chip MK66FX1M0VMD18. 512k flash, 192k ram, 4k eePROM. 1m flash, 256k ram, 4k eePROM. 2048k flash 64k reserved for recovery & EEPROM emulation. 3 can bus 1 with CAN FD. 120 mhz arm cortex-m4 with floating point unit 512k flash, capable of full 100 mbit/sec speed native 4 bit sdio micro sd card port i2s audio port, 192k ram, 4k eeprom microcontroller chip mk64fx512vmd12 1 can bus port 16 general purpose dma channels 5 volt tolerance on all digital i/o pins 62 i/o pins 42 breadboard friendly 25 analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 20 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 3 I2C Ports Real Time Clock 1024k ram 512k is tightly coupled.

10 pwm outputs 7 timers for intervals/delays, separate from PWM. 2 usb ports, both 480 MBit/sec. Pre-soldered header pins.

#ad



20PCS 2.54mm Breakaway PCB Board 40Pin Male and Female Header Connector for Arduino Shield

#ad
Ocrtechci dz-pz-01 #ad - 32 bit arm cortex-m0+ 48 mhz cpu 62kb flash memory, 8kB RAM, 1/8emukB EEPROM. All 3 clocks are created by the Teensy. Microcontroller chip MK64FX512VMD12. Made of copper and plastic. 120 mhz arm cortex-m4 with Floating Point Unit. 1m flash, 256k ram, 4k eePROM. 20pcs. Microcontroller chip MK66FX1M0VMD18. 512k flash, 192k ram, 4k eePROM.

2048k flash 64k reserved for recovery & EEPROM emulation. The sgtl5000 chip operates in "slave mode", tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, where all its clock pins are inputs. 180 mhz arm cortex-m4 with Floating Point Unit. 2 i2s digital Audio. 3 uarts serial ports spi, i2s, can bus, i2c, IR modulator I2S for high quality audio interface.

20PCS 2.54mm Breakaway PCB Board 40Pin Male and Female Header Connector for Arduino Shield #ad - The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, wiz820io Ethernet, and other 3.3v add-on boards that require a little more power. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3.

#ad



Teensy 3.2 with Pins

#ad
PJRC . #ad - Also, it can provide system voltage of 3. 3v to other devices at up to 100mA. Teensy 3. 2 and 3. 1 have exactly the same pinout. Teensy 3. 2 provides more power on its 3. 3v pin, and accepts a wider voltage input range. 3 uarts serial ports spi, i2c, & I2S I2S for high quality audio interface. Audio data uses i2s signals, and 3 clocks, BCLK 1.

Teensy 3.2 with Pins #ad - 41 mhz and mclK 11. 29 mhz. 2048k flash 64k reserved for recovery & EEPROM emulation. 3 uarts serial ports spi, can bus, i2s, i2c, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.

3v add-on boards that require a little more power. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3. 2, 3. 5 or 3. 6.

#ad



Hotop 50 Pack Single Row 40 Pin 2.54 mm Male Pin Header Connector

#ad
Hotop #ad - All 3 clocks are created by the Teensy. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. 3 uarts serial ports spi, i2c, can bus, i2s, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.

Hotop 50 Pack Single Row 40 Pin 2.54 mm Male Pin Header Connector #ad - 3v add-on boards that require a little more power. This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3. 2, 3. 5 or 3. 6. The audio chip connects to teensy v3 using 7 signals. Microcontroller chip MK64FX512VMD12. Made of copper and plastic.

10 pwm outputs 7 timers for intervals/delays, separate from PWM. 13 high resolution analog inputs 27 Digital I/O Pins NOT 5V Tolerant. Great tools for arduino prototype shield. This pin header is an good connector for the PCB board and integrated circuit, apply widely in the computer and breadboard.

#ad